Metal stamping parts can be seen everywhere in our lives, but many friends who make metal stamping parts and editors report that the damage rate of metal stamping parts is high, but they don't know how to solve it. The following editors are based on years of experience in the metal stamping industry Hard work, summed up how we can reduce the damage rate of metal stamping parts?
1. After the installation, pay attention to the maintenance of the metal stamping parts, mainly to prevent the metal stamping parts from rusting and erosion. They cannot be used violently in daily use, to prevent the hard closing and opening, causing damage to the stamping parts.
2. For some metal stampings that are stressed (such as the bottom bracket and other parts) and are more prone to contact with air, the corresponding protective measures should be adopted reasonably.
3. To understand the performance and usage of metal stamping parts, the reasonable hardware accessories and product functions selected or customized according to the corresponding needs must meet the relevant national regulations and be matched with the relevant products selected.
4. It is necessary to install a metal lining board and install small metal stamping parts with screws. The thickness of the lining board should be greater than at least twice the pitch. It shall not be fastened on plastic profiles, nor shall it adopt non-metallic lining.
